#17 Wet tint and flip up liner as shown

#18 Spray bottom edge thoroughly

#19 Place gasket tool between rubber and glass

#20 Remove the rest of the liner

#21 Squeegee water toward the bottom pulling back on the gasket as you go

#22 Spray window again and squeegee the entire window again, starting at the top working down and toward the sides (do not roll window down, start as high on glass as possible)

Repeat steps 1-23 for each window. 

#23 Wrap towel around squeegee, push down toward bottom to soak up solution being pushed from under tint

Back