#8 Carefully peel off liner making sure film stays on the glass

#9 Slowly peel back, (spray the film while peeling)

#11 Pull the liner down evenly until you are 2" from bottom edge

#12 Make sure your hands and fingers are clean, before touching the film dip water

#13 Remove film and liner from outside of glass, be careful not to let the liner come off the film the rest of the way

#14 Place tint on the glass 1/16" from the edge on the top of the glass

#15 Spray solution on tint and squeegee water from tint starting at the top and working toward the edge. Work halfway down, wrap paper towel around squeegee and squeegee top edge pushing upward to absorb water (as shown in figure #23)

( Back   Next )